ccd area image sensor 1 MW3759MAE 11mm (type-2/3) wide ccd area image sensor n overview the MW3759MAE is a 11mm (type-2/3) multiple frame interline transfer ccd (m-fit-ccd) solid state image sensor device. this device uses photodiodes in the optoelectric conversion section and ccds for signal read out. the electronic shutter function has made an expo- sure time of 1/10000 seconds possible. further, this device has the features of high sensitivity, low noise, broad dynamic range, and low smear. this device has a total of 638,810 pixels (1,270 horizontal 503 vertical) and provides stable and clear images with a resolution of 850 horizontal tv-lines and 350 vertical tv-lines. part number size system color or b/w MW3759MAE 11mm(type-2/3) ntsc b/w n features total number of pixels: 1,270 (horizontal) 503 (vertical) high sensitivity low noise broad dynamic range low smear low image lag electronic shutter no image distortion high reliability aspect ratio 16:9 32-pin dil package n applications cameras for broadcasting n device configuration diagram (unit : column) wdip032-c-0600a 132 pw vs 231 rg sub 330 rd a1 429 od a2 528 vo a3 627 lg a4 726 og a5 825 h1 a6 924 h2 a7 10 23 pw a8 11 22 ig b1 12 21 hs b2 13 20 bl2 b3 14 19 bl1 b4 15 18 b8 b5 16 17 b7 b6 (top view) al shielding pd effective pixels ob part accumulater 485 1021 1 3 3 11 1 6 3 vertical dummy bit (no pd) pd for transient horizontal dummy bit horizontal dummy bit vertical dummy bit (no pd) effective horizontal ccd 1185 9 9651 1 1270 2 1 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
MW3759MAE ccd area image sensor 2 parameter symbol rating operating condition unit min max min typ max p-well voltage v pw reference voltage ? 0 ? v reset gate voltage rg(h) ? 20.0 4.7 5.0 5.3 v rg(l) 0 ? 0 adjust 10.0 reset drain voltage rd 0 20.0 15.5 16.0 16.5 v output drain voltage od 0 20.0 15.5 16.0 16.5 v video output voltage vo ?????? loadgate voltage lg 0 20.0 1.7 2.0 2.3 v output gate voltage og 0 20.0 0.7 1.0 1.3 v horizontal ccd h1(h) 0 20.0 4.7 5.0 5.3 v gate voltage 1 h1(l) 0 ?? 0 ? horizontal ccd h2(h) 0 20.0 4.7 5.0 5.3 v gate voltage 2 h2(l) 0 ?? 0 ? p-well voltage pw reference voltage ? 0 ? v horizontal input gate voltage ig 0 20.0 ? 0 ? v pin no. symbol descriptions 17 b6 accumulator vertical ccd gate 18 b5 accumulator vertical ccd gate 19 b4 accumulator vertical ccd gate 20 b3 accumulator vertical ccd gate 21 b2 accumulator vertical ccd gate 22 b1 accumulator vertical ccd gate 23 a8 photo detector vertical ccd gate 24 a7 photo detector vertical ccd gate 25 a6 photo detector vertical ccd gate 26 a5 photo detector vertical ccd gate 27 a4 photo detector vertical ccd gate 28 a3 photo detector vertical ccd gate 29 a2 photo detector vertical ccd gate 30 a1 photo detector vertical ccd gate 31 sub substrate 32 vs vertical input source pin no. symbol descriptions 1 pw p-well 2 rg reset gate 3 rd reset drain 4 od output drain 5 vo video output 6 lg load gate 7 og output gate 8h1 * horizontal ccd gate 1 9h2 * horizontal ccd gate 2 10 pw p-well 11 ig horizontal input gate 12 hs horizontal input source 13 bl2 accumulator final gate 2 14 bl1 accumulator final gate 1 15 b8 accumulator vertical ccd gate 16 b7 accumulator vertical ccd gate n pin descriptions n absolute maximum ratings and operating conditions note) * : 270pf 270pf 160pf h1 h2 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
ccd area image sensor MW3759MAE 3 n absolute maximum ratings and operating conditions (continued) parameter symbol rating operating condition unit min max min typ max horizontal input source voltage hs 0 20.0 15.5 16.0 16.5 v accumulator final bl2(m) ? 20.0 1.7 2.0 2.3 v gate voltage 2 bl2(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator final bl1(m) ? 20.0 0.7 1.0 1.3 v gate voltage 1 bl1(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator vertical b8(m) ? 20.0 1.7 2.0 2.3 v ccd gate (b8) voltage b8(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator vertical b7(m) ? 20.0 0.7 1.0 1.3 v ccd gate (b7) voltage b7(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator vertical b6(m) ? 20.0 1.7 2.0 2.3 v ccd gate (b6) voltage b6(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator vertical b5(m) ? 20.0 0.7 1.0 1.3 v ccd gate (b5) voltage b5(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator vertical b4(m) ? 20.0 1.7 2.0 2.3 v ccd gate (b4) voltage b4(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator vertical b3(m) ? 20.0 0.7 1.0 1.3 v ccd gate (b3) voltage b3(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator vertical b2(m) ? 20.0 1.7 2.0 2.3 v ccd gate (b2) voltage b2(l) - 10.0 ?- 9.3 - 9.0 - 8.7 accumulator vertical b1(m) ? 20.0 0.7 1.0 1.3 v ccd gate (b1) voltage b1(l) - 10.0 ?- 9.3 - 9.0 - 8.7 photo detecter vertical a8(m) ? 20.0 1.7 2.0 2.3 v ccd gate (a8) voltage a8(l) - 10.0 ?- 9.3 - 9.0 - 8.7 photo detecter vertical a7(h) ? 20.0 15.7 16.0 16.3 v ccd gate (a7) voltage a7(m) ? 20.0 0.7 1.0 1.3 a7(l) - 10.0 ?- 9.3 - 9.0 - 8.7 photo detecter vertical a6(m) ? 20.0 1.7 2.0 2.3 v ccd gate (a6) voltage a6(l) - 10.0 ?- 9.3 - 9.0 - 8.7 photo detecter vertical a5(h) ? 20.0 15.7 16.0 16.3 v ccd gate (a5) voltage a5(m) ? 20.0 0.7 1.0 1.3 a5(l) - 10.0 ?- 9.3 - 9.0 - 8.7 photo detecter vertical a4(m) ? 20.0 1.7 2.0 2.3 v ccd gate (a4) voltage a4(l) - 10.0 ?- 9.3 - 9.0 - 8.7 photo detecter vertical a3(h) ? 20.0 15.7 16.0 16.3 v ccd gate (a3) voltage a3(m) ? 20.0 0.7 1.0 1.3 a3(l) - 10.0 ?- 9.3 - 9.0 - 8.7 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
MW3759MAE ccd area image sensor 4 note )* : v sub(1) : dc component in normal operation v sub(2) : shown in the diagram at the right (when electronic shutter operates) n image characteristics color effective s/n saturation output standard vertical image output smear part number or pixels typ typ (mv) typ typ typ b/w h v ( - db) r g b (mv) (db) (%) MW3759MAE b/w 1185 485 62 1300 1300 1000 300 - 125 0 n absolute maximum ratings and operating conditions (continued) parameter symbol rating operating condition unit min max min typ max photo detecter vertical a2(m) ? 20.0 1.7 2.0 2.3 v ccd gate (a2) voltage a2(l) - 10.0 ?- 9.3 - 9.0 - 8.7 photo detecter vertical a1(h) ? 20.0 15.7 16.0 16.3 v ccd gate (a1) voltage a1(m) ? 20.0 0.7 1.0 1.3 a1(l) - 10.0 ?- 9.3 - 9.0 - 8.7 substrate voltage * sub(1) 0 18.0 3.0 adjust 16.0 v sub(2) 0 40.0 37.5 38.0 38.5 vertical input source voltage vs 0 20.0 15.5 16.0 16.5 v n graphs of characteristics ccd spectral responsive characteristics sub(2) sub(1) 0 v 1.0 0.5 0.0 400 500 600 700 800 spectral sensitivity wave length (nm) note )the v sub initial setting is 5.0v, and is adjusted to the minimum voltage when blooming does not occur at 1600 times the light input of standard light input, or the minimum voltage when injection does not occur. srandard light input is the one when expos ure is done at a lens aperture of f11, using a light source of 2856k and 920nt, and placing a color temperature conversion filter l b- 40 (hoya) an ir cutting filter caw-500s (t = 2.5 mm) in the light path maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
ccd area image sensor MW3759MAE 5 n package dimensions (unit : mm) wdip032-c-0600a 22.00 0.20 18.80 0.20 3.20 0.20 1.65 0.10 19.00 0.20 17.80 0.20 6.18 0.20 17.55 0.10 0.64 0.10 3.90 0.30 0.30 0.05 15.24 0.30 ccd within (chip roatation 1.5 ) double side anti-reflection film coated glass t = 0.7 0.25 0.05 3.58 0.20 10.41 0.10 10.74 0.20 5.54 0.20 6.71 0.20 io 19.05 0.20 1.27 0.13 0.46 0.10 0.80 0.10 maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
